Parts by Type

print This page

Weld Yokes

PART NUMBER SERIES MATERIAL TUBE DIA. TUBE WALL BUTT DIA. C/L TO WELD JOINT ANGLE NOTES VEHICLE CLASS BRAND
1-26-297 1100 Steel 1.250 0.095 1.068 1.688 0 LD Spicer
10-1005 1000 Steel 2.000 0.083 1.845 2.160 PTO LD Neapco
10-26-37 1000 Steel 1.250 0.095 1.068 2.560 60 LD Spicer
10-28-97 1000 Steel 1.750 0.065 1.625 2.000 0 LD Spicer
100-28-17 SPL100 Steel 4.000 0.095 3.810 2.969 0 Active HD Spicer
100-28-27 SPL100 Steel 4.000 0.095 3.810 3.240 0 Half round yoke HD Spicer
1126-171 9951-22 Steel 1.750 0.083 1.591 1.625 0 Infiniti Front Shafts, Staked LD PTI
1126-243 1151-243 Steel 1.750 0.083 1.591 1.811 0 Infiniti Front Shafts, outside snap ring LD PTI
1226-17 1251 Steel 1.775 0.065 1.667 1.750 Subaru LD PTI
1226-20 1251 Steel 2.000 0.083 1.845 1.750 Subaru LD PTI
1226-201 1251 Steel 2.000 0.065 1.875 1.750 Subaru LD PTI
1226-22 1251 Steel 2.370 0.065 2.140 1.750 Subaru LD PTI
1226-25 1251 Steel 2.500 0.065 2.375 1.750 Nissan LD PTI
1226-251 1251-22 Steel 2.500 0.065 2.375 1.375 0 HONDA WELD YOKE LD PTI
1226-26 1251 Steel 2.550 0.080 2.400 1.750 Nissan LD PTI
1326-20 1351-20 Steel 2.560 0.065 2.435 2.000 Toyota LD PTI
1326-21 1351-21 Steel 2.560 0.065 2.435 2.000 Toyota LD PTI
140-28-17 SPL140 Steel 4.331 0.197 3.957 3.500 0 HD Spicer
1426-17 1100 Steel 1.750 0.065 1.625 1.500 LD PTI
1426-20 1100 Steel 2.000 0.065 1.875 1.500 Solid Butt LD PTI
1426-203 1100 Steel 2.000 0.095 1.821 1.375 0 Weld Yoke, Solid Butt, LD PTI
1426-25 1100 Steel 2.500 0.065 2.375 1.500 LD PTI
1426-30 1100 Steel 3.000 0.065 2.875 1.500 LD PTI
1426-862 CVJ Steel 2.500 0.065 2.375 1.250 used with 1452-8602 cvj (fixed) and 1453-860 stub (midship/ 25-065), M8-1.25 LD PTI
1426-863 CVJ Steel 2.500 0.083 2.345 1.250 used with 1452-8602 cvj (fixed) and 1453-863 stub (midship/ 25-083), M8-1.25 LD PTI
1526-25 1551-20 Steel 2.500 0.065 2.375 1.750 Mazda OE size LD PTI
170-28-09269 SPL170 Steel 4.500 0.137 4.242 4.567 HD Spicer
170-28-13415 SPL170 Steel N/A N/A 4.112 4.567 0 Tube yoke presses into splined sleeve HD Spicer
170-28-17 SPL170 Steel 4.961 0.118 4.746 3.700 0 HD Spicer
170-28-27 SPL170 Steel 4.724 0.197 4.350 4.724 0 HD Spicer
170-28-37 SPL170 Steel 4.724 0.197 4.350 4.724 0 Tube yoke presses into splined sleeve HD Spicer
1726-20 1751 Steel 2.000 0.083 1.845 1.750 Suzuki LD PTI
2-26-147 1310 Steel 1.250 0.188 0.875 2.281 23 LD Spicer
2-26-187 1310 Steel 1.250 0.098 1.068 2.120 0 LD Spicer
2-26-347 1310 Steel 1.250 0.120 1.016 2.125 30 LD Spicer
2-28-01484 1330 Aluminum 4.540 0.083 4.388 4.000 LD Spicer
2-28-06030 1330 Steel 3.000 0.083 2.844 2.240 LD Spicer
2-28-1177 1330 Steel 3.000 0.065 2.881 1.719 25 LD Spicer
2-28-12027 1330 Steel 4.000 0.065 3.884 2.220 LD Spicer
2-28-1617 1310 Steel 2.750 0.083 2.595 1.688 21.5 LD Spicer
2-28-16881 1330 Aluminum 4.000 0.083 3.855 2.250 LD Spicer
2-28-1697 1330 Steel 3.000 0.083 2.844 1.719 25 LD Spicer
2-28-1707 1330 Steel 2.500 0.083 2.345 1.719 25 LD Spicer
2-28-1717 1330 Steel 3.500 0.083 3.344 1.812 20 LD Spicer
2-28-1757 1310 Steel 2.000 0.120 1.771 1.688 22 LD Spicer
2-28-1947 1210 Steel 2.500 0.065 2.381 1.312 20 LD Spicer
2-28-1967 1330 Steel 4.000 0.083 3.844 1.688 LD Spicer
2-28-1977 1330 Steel 3.500 0.065 3.381 1.812 0 LD Spicer
2-28-2417 1210 Steel 2.000 0.083 1.845 1.500 20 LD Spicer
2-28-277 1310 Steel 2.500 0.065 2.381 1.844 30 LD Spicer
2-28-2777 1330 Steel 2.000 0.120 1.771 2.125 30 Same as 3326-204 but .375" longer cl to weld. LD Spicer
2-28-307 1310 Steel 2.750 0.065 2.631 1.688 21.5 LD Spicer
2-28-3187 1310 Steel 1.750 0.095 1.571 1.688 22 LD Spicer
2-28-3207 1310 Steel 3.000 0.065 2.881 1.844 0 LD Spicer
2-28-327 1310 Steel 3.000 0.065 2.881 1.688 18 LD Spicer
2-28-3327 1330 Aluminum 4.000 0.083 3.855 2.406 LD Spicer
2-28-3377 1330 Aluminum 4.000 0.083 3.855 2.130 LD Spicer
2-28-3487 1330 Aluminum 5.000 0.065 4.888 1.820 LD Spicer
2-28-3507 1330 Aluminum 4.520 0.075 4.388 2.130 LD Spicer
2-28-3517 1330 Aluminum 4.160 0.086 3.998 2.406 Fits GM swedged tube LD Spicer
2-28-357 1310 Steel 2.000 0.083 1.845 1.690 0 LD Spicer
2-28-367 1310 Steel 2.500 0.083 2.345 1.844 30 LD Spicer
2-28-3787 1330 Steel 4.000 0.065 3.884 1.690 0 LD Spicer
2-28-3837 1310 Steel 4.000 0.083 3.844 1.910 0 LD Spicer
2-28-397 1310 Steel 3.500 0.065 3.381 1.688 21.5 LD Spicer
2-28-417 1310 Steel 2.000 0.065 1.881 1.688 22 LD Spicer
2-28-427 1310 Steel 3.500 0.083 3.344 1.688 0 LD Spicer
2-28-437 1310 Steel 3.000 0.083 2.844 1.688 0 LD Spicer
2-28-447 1310 Steel 1.750 0.065 1.625 1.688 22 LD Spicer
2-28-477 1310 Steel 4.000 0.083 3.844 1.500 0 LD Spicer
2-28-557 1310 Steel 3.250 0.065 3.130 1.688 21.5 LD Spicer
2-28-577 1310 Steel 2.000 0.095 1.821 1.688 22 LD Spicer
2252-681 CVJ Steel 2.500 0.065 2.375 3.500 0 used for IRS suspension LD PTI
2252-681M CVJ Steel 3.000 0.065 2.875 2.375 0 machined on 3rd surface for 3 inch tubing from 2252-681 LD PTI
2252-683 CVJ Steel 2.500 0.083 2.345 3.500 0 used for IRS suspension LD PTI
2326-25 2351-20 Steel 2.500 0.065 2.375 1.750 Toyota LD PTI
2326-25M 2351-20 Steel 2.500 0.083 2.345 1.750 Toyota LD PTI
2326-26 2351-20 Steel 2.560 0.065 2.435 1.750 Toyota LD PTI
250-28-17 SPL250 Steel 5.197 0.236 4.746 4.094 0 HD Spicer
250-28-37 SPL250 Steel N/A N/A 4.423 4.882 0 Tube yoke presses into splined sleeve HD Spicer
2526-251 CVJ Steel 2.500 0.083 2.345 1.390 used with 2552-1001 CVJ (plunge) and 2553-252 CVJ stub (midship/ 25-083), M8-1.25 thread LD PTI
2526-253 CVJ Steel 2.500 0.083 2.345 1.500 used with 2552-1002 cvj (plunge) and 2553-252 stub (midship/ 25-083), M10-1.25 thread LD PTI
26050911 3R Steel 2.750 0.095 2.583 1.800 LD AAM
26064280 1410 Steel 3.500 0.065 3.386 2.190 LD AAM
26064294 1410 Steel 2.750 0.095 2.583 2.190 LD AAM
2626-21 7260 Steel 2.250 0.095 2.066 1.625 Mazda LD PTI
2626-22 7260 Steel 2.250 0.065 2.120 1.625 Mazda LD PTI
2626-25 7260 Steel 2.500 0.065 2.375 1.625 Det#2405863 LD PTI
2626-25M 7260 Steel 2.500 0.083 2.345 1.625 LD PTI
2626-26 7260 Steel 2.570 0.065 2.455 1.625 Mazda LD PTI
2626-30 7260 Steel 3.000 0.065 2.875 1.625 Det#2852196 LD PTI
2626-302 2651-65 Steel 3.000 0.065 2.887 1.625 0 Kia, takes 2651-65 OE joint LD PTI
2626-31 7260 Steel 3.000 0.083 2.844 1.625 Det#3516040 LD PTI
2626-32 7260 Steel 3.250 0.065 3.130 1.625 Det#2883629 LD PTI
2626-40 7260 Steel 4.000 0.065 3.875 2.000 Det#3516021 LD PTI
2626-41 7260 Steel 4.000 0.083 3.844 2.000 LD PTI
2726-150 1751 Steel 1.500 0.083 1.340 2.187 0 BMW fronts, LD PTI
2826-101 1751 Steel 1.000 0.120 0.967 1.675 0 Mercedes Front LD PTI
2926-27 7290 Steel 2.750 0.065 2.625 1.750 Det#2781927 LD PTI
2926-30 7290 Steel 3.000 0.083 2.844 1.812 LD PTI
2926-31 7290 Steel 3.000 0.065 2.875 1.812 Det#4384333 LD PTI
2926-32 7290 Steel 3.250 0.065 3.130 1.812 Det#2883729 LD PTI
2926-40 7290 Steel 4.000 0.065 3.875 2.000 (Det#3516103) LD PTI
2926-41 7290 Steel 4.000 0.083 3.844 2.000 LD PTI
3-26-117 1410 Steel 2.000 0.120 1.771 2.000 0 Outside Yoke Dimension (E) In.
4.438"		 LD Spicer
3-26-437 1410 Steel 2.500 0.156 2.217 2.000 0 LD Spicer
3-28-06301 1350 Aluminum 5.090 0.107 4.876 3.173 Vented LD Spicer
3-28-07058 1350 Aluminum 5.090 0.107 4.888 3.173 LD Spicer
3-28-1197 1350 Aluminum 3.500 0.165 3.188 1.837 LD Spicer
3-28-1307 1350 Aluminum 4.000 0.083 3.855 2.406 LD Spicer
3-28-1347 1350 Aluminum 5.000 0.065 4.888 1.844 LD Spicer
3-28-1407 1350 Aluminum 4.520 0.075 4.388 2.130 LD Spicer
3-28-157 1350 Steel 3.000 0.095 2.821 2.000 0 LD Spicer
3-28-1647 1410 Aluminum 5.000 0.063 4.888 2.281 LD Spicer
3-28-1667 1350 Steel 4.000 0.065 3.884 1.690 LD Spicer
3-28-16880 1350 Aluminum 4.000 0.083 3.855 2.125 LD Spicer
3-28-16885 1350 Aluminum 4.160 0.086 3.998 2.232 LD Spicer
3-28-257 1350 Steel 3.500 0.065 3.381 1.812 20 LD Spicer
3-28-267 1410 Steel 3.000 0.095 2.821 2.125 30 LD Spicer
3-28-327 1410 Steel 2.500 0.095 2.321 2.000 0 LD Spicer
3-28-367 1410 Steel 3.500 0.065 3.381 2.125 30 LD Spicer
3-28-387 1410 Steel 4.000 0.095 3.821 1.875 0 LD Spicer
3-28-417 1350 Steel 4.000 0.083 3.844 1.688 21 LD Spicer
3-28-427 1350 Steel 3.500 0.083 3.344 1.840 20 LD Spicer
3-28-447 1410 Steel 3.000 0.083 2.844 1.625 8 LD Spicer
3-28-457 1410 Steel 4.000 0.083 3.844 1.875 22 LD Spicer
3-28-47 1350 Steel 2.500 0.083 2.345 1.938 20 LD Spicer
3-28-47M 1350 Steel 2.500 0.120 2.266 1.938 20 machined from 25-083 part in house LD PTI
3-28-497 1480 Steel 3.000 0.095 2.821 1.688 8 LD Spicer
3-28-507 1480 Steel 4.000 0.083 3.844 2.031 22.5 LD Spicer
3-28-537 1480 Steel 3.500 0.083 3.344 2.031 22 LD Spicer
3-28-547 1480 Steel 3.500 0.083 3.344 2.312 35 LD Spicer
3-28-557 1410 Steel 3.500 0.083 3.344 2.125 30 LD Spicer
3-28-567 1480 Steel 3.500 0.095 3.321 2.031 22 LD Spicer
3-28-57 1350 Steel 3.000 0.083 2.844 2.000 20 LD Spicer
3-28-627 1480 Steel 4.000 0.095 3.821 2.031 22.5 LD Spicer
3-28-777 1350 Steel 2.000 0.120 1.771 2.125 30 Same as 3526-204 but .375" longer cl to weld. LD Spicer
3-28-97 1410 Steel 3.000 0.083 2.844 2.125 30 LD Spicer
3-28-977 1350 Aluminum 3.500 0.120 3.280 1.837 LD Spicer
3-28-987 1410 Steel 2.750 0.083 2.595 1.625 0 LD Spicer
3026-17 1300 Steel 1.750 0.095 1.571 1.688 LD PTI
3026-20 1300 Steel 2.000 0.095 1.821 1.688 LD PTI
3026-25 1300 Steel 2.500 0.065 2.375 1.688 LD PTI
3026-30 1300 Steel 3.000 0.065 2.875 1.688 LD PTI
3126-108 CVJ Steel 2.500 0.083 2.345 1.750 used with 3152-1081 (plunge) and 3153-1081 stub (midship/ 25-083), M10-1.25 LD PTI
3126-201 1310 ISR Steel 2.000 0.065 1.875 1.250 These only take a ISR ujoint number 1-0350 LD AAM
3126-202 1310 ISR Steel 2.000 0.083 1.845 1.250 LD AAM
3126-204 1310 ISR Steel 2.000 0.120 1.771 1.500 Inside Snap Ring 1310 LD AAM
3126-253 CVJ Steel 2.500 0.083 2.345 1.625 used with 3152-1002 cvj (plunge) and 3153-253 stub (midship/ 25-083) LD PTI
3126-25CF 1310 Aluminum 2.780 0.180 2.500 2.250 Used with Carbon Fiber LD PTI
3126-261 1310 Steel 2.550 0.080 2.400 1.875 Nissan OE LD PTI
3126-306A 1310 Aluminum 3.000 0.125 2.757 1.875 LD PTI
3126-30A 1310 Aluminum 3.000 0.125 2.757 1.625 LD PTI
3126-30CF 1310 Aluminum 3.260 0.130 3.000 2.000 Used with Carbon Fiber LD PTI
3126-31A 1310 Aluminum 3.000 0.083 2.844 1.750 LD PTI
3126-356A 1310 Aluminum 3.500 0.125 3.257 2.375 LD PTI
3126-35A 1310 Aluminum 3.500 0.125 3.257 2.375 LD PTI
3326-204 1330 Steel 2.000 0.120 1.771 1.750 25 Same as 2-28-2777 but .375" shorter cl to weld. LD PTI
3326-271 1330 Steel 2.750 0.065 2.625 1.719 LD PTI
3326-272 1330 Steel 2.750 0.083 2.595 1.719 LD PTI
3326-306A 1330 Aluminum 3.000 0.125 2.757 2.500 LD PTI
3326-30A 1330 Aluminum 3.000 0.125 2.757 2.500 LD PTI
3326-356A 1330 Aluminum 3.500 0.125 3.257 2.375 LD PTI
3326-35A 1330 Aluminum 3.500 0.125 3.257 1.750 LD PTI
3326-40 1330 Steel 4.000 0.083 3.844 1.750 LD PTI
3326-405A 1330 Aluminum 4.000 0.083 3.844 2.375 LD PTI
3326-406A 1330 Aluminum 4.000 0.125 3.757 2.375 LD PTI
3326-40A 1330 Aluminum 4.000 0.125 3.757 1.750 LD PTI
3326-41 1330 Steel 4.000 0.065 3.884 1.690 LD PTI
3326-41A 1330 Aluminum 4.000 0.083 3.855 2.250 Seen on Ford Ranger shafts LD PTI
3326-501A 1330 Aluminum 5.000 0.063 4.888 4.110 LD PTI
3326-506A 1330 Aluminum 5.000 0.125 4.757 3.000 LD PTI
3326-50A 1330 Aluminum 5.000 0.125 4.755 2.875 LD PTI
3526-201 1350 Steel 2.000 0.120 1.771 2.125 Forged, extra thick ears LD PTI
3526-204 1350 Steel 2.000 0.120 1.771 1.750 25 Same as 3-28-777 but .375" shorter cl to weld. LD PTI
3526-271 1350 Steel 2.750 OEM 2.652 1.614 Too tight for 275-065 tube. Fits OEM metric tube. LD AAM
3526-306A 1350 Aluminum 3.000 0.125 2.757 2.500 LD PTI
3526-30A 1350 Aluminum 3.000 0.125 2.757 2.500 LD PTI
3526-30CF 1350 Aluminum 3.260 0.130 3.000 2.250 Used with Carbon Fiber LD PTI
3526-356A 1350 Aluminum 3.500 0.125 3.257 2.375 LD PTI
3526-35A 1350 Aluminum 3.500 0.125 3.257 1.750 LD PTI
3526-35CF 1350 Aluminum 3.790 0.145 3.500 2.250 For use with Carbon Fiber LD PTI
3526-36 1350 Steel 3.500 0.065 3.386 1.941 LD AAM
3526-403A 1350 Aluminum 4.000 0.083 3.844 2.188 LD AAM
3526-405A 1350 Aluminum 4.000 0.083 3.844 2.375 LD PTI
3526-406A 1350 Aluminum 4.000 0.125 3.757 2.375 LD PTI
3526-40A 1350 Aluminum 4.000 0.125 3.757 1.750 LD PTI
3526-4830 1350 Aluminum 4.000 0.083 3.840 1.875 Made in USA LD PTI
3526-49A 1350 Aluminum 5.000 0.125 4.755 2.177 Vented (Originally fit AAM OE 4.9 x 0.083 tube). LD AAM
3526-501A 1350 Aluminum 5.000 0.063 4.888 4.110 LD PTI
3526-506A 1350 Aluminum 5.000 0.125 4.757 3.000 LD PTI
3526-51A 1350 Aluminum 5.000 0.125 4.755 2.875 LD PTI
3626-252 CVJ Steel 2.500 0.083 2.345 1.250 used with 2752-941 CVJ (plunge) and 3653-252 CVJ stub (midship/ 25-083), needs 2718-941 boot LD PTI
3R26-201 3R Steel 2.000 0.140 1.725 1.750 OE AAM (Front shafts) LD AAM
3R26-22 3R Steel 2.250 0.154 1.958 1.750 Fits OE tubing on front shaft of late model GM pickups LD AAM
3R26-221 3R Steel 2.250 0.120 2.023 1.750 LD AAM
3R26-27 3R Steel 2.750 0.065 2.625 2.250 .5" longer than OE LD PTI
3R26-271 3R Steel 2.750 0.065 2.625 1.750 3R26-27 is .5" longer LD PTI
3R26-29 3R Steel 2.750 0.095 2.562 2.250 LD PTI
3R26-30 3R Steel 3.000 0.083 2.844 1.750 LD PTI
3R26-30A 3R Aluminum 3.000 0.083 2.844 2.280 LD AAM
3R26-31 3R Steel 3.000 0.065 2.875 1.750 LD PTI
3R26-35 3R Steel 3.500 0.065 3.381 1.940 LD PTI
3R26-35A 3R Aluminum 3.500 0.125 3.257 2.500 LD PTI
3R26-40 3R Steel 4.000 0.065 3.875 1.690 LD PTI
3R26-40A 3R Aluminum 4.000 0.083 3.847 2.177 Vented LD AAM
3R26-41A 3R Aluminum 4.000 0.083 3.844 2.700 LD AAM
4-28-257 1550 Steel 3.500 0.095 3.321 1.844 8 LD Spicer
4-28-277 1550 Steel 4.000 0.083 3.844 2.188 22.5 LD Spicer
4-28-277M 1550 Steel 4.000 0.095 3.821 2.188 22.5 Machined in house LD Spicer
4-28-307 1550 Steel 3.500 0.095 3.321 2.188 22.5 LD Spicer
4-28-417 1550 Steel 3.500 0.095 3.321 2.688 35 LD Spicer
4-28-487 1550 Steel 3.500 0.134 3.243 2.188 22.5 LD Spicer
4-28-627 1550 Steel 3.500 0.134 3.243 1.810 0 LD Spicer
4-28-657 1550 Steel 3.500 0.156 3.199 2.188 0 LD Spicer
40000947 3R Aluminum 3.000 0.083 2.844 2.275 Vented LD AAM
40016557 1350 Steel 3.500 0.083 3.355 1.941 LD AAM
40019009 1410 Steel 3.500 0.083 3.355 2.191 LD AAM
40034412 1350 Aluminum 4.000 0.111 3.788 2.675 LD AAM
40046285 1285 Steel 2.750 0.065 2.631 1.575 1285 U-Joint not available LD AAM
40046287 1285 Steel 2.000 0.059 1.887 1.575 0 1285 U-Joint not available LD AAM
40047280 1550 Steel 3.500 0.095 3.331 2.344 LD AAM
40055443 1350 Aluminum 5.000 0.083 4.846 2.530 LD AAM
40055445 1350 Aluminum 5.000 0.083 4.846 3.900 Vented LD AAM
40055491 1410 Aluminum 5.000 0.083 4.846 2.219 Discontinued LD AAM
40055492 1410 Aluminum 5.000 0.083 4.846 3.898 LD AAM
40066268 1310 ISR Steel 2.000 0.065 1.892 1.500 These only take a ISR ujoint number 1-0350 LD AAM
40068911 1480 Aluminum 5.000 0.083 4.846 2.219 Vented LD AAM
40070854 1410 Aluminum 4.500 0.083 4.344 2.425 Vented (See 4126-452A) LD AAM
40089955 1480 Aluminum 5.000 0.083 4.846 3.898 LD AAM
40092105 1350 Aluminum 4.910 0.083 4.760 3.898 LD AAM
4126-35 1410 Steel 3.500 OEM 3.361 2.344 Butt on this WY is an odd 3.361" which is directly in between a 35-065 & 35-083. Machining may be required. LD AAM
4126-405A 1410 Aluminum 4.000 0.083 3.844 2.375 LD PTI
4126-406A 1410 Aluminum 4.000 0.125 3.757 2.375 LD PTI
4126-40A 1410 Aluminum 4.000 0.083 3.847 2.131 Vented LD AAM
4126-41A 1410 Aluminum 4.000 0.125 3.757 2.875 6061-T6 Aluminum LD PTI
4126-451A 1410 Aluminum 4.500 0.083 4.344 3.543 LD AAM
4126-452A 1410 Aluminum 4.500 0.083 4.344 2.425 Non-Vented LD AAM
4126-45A 1410 Aluminum 4.500 0.083 4.344 2.130 LD AAM
4126-501A 1410 Aluminum 5.000 0.065 4.888 4.109 LD PTI
4126-506A 1410 Aluminum 5.000 0.125 4.757 3.000 LD PTI
4126-50A 1410 Aluminum 5.000 0.125 4.755 2.875 LD PTI
4126-51A 1410 Aluminum 5.000 0.125 4.755 2.219 Discontinued LD AAM
4826-35 1480 Steel 3.500 0.083 3.355 2.344 These have a slightly larger butt diameter making it difficult to press into 35-083 Tube. LD AAM
4826-45A 1480 Aluminum 4.500 0.083 4.344 2.250 LD PTI
4826-46A 1480 Aluminum 4.500 0.083 4.344 2.431 Vented LD AAM
4826-47A 1480 Aluminum 4.750 0.110 4.827 2.250 Aluminum, Vented LD AAM
4826-506A 1480 Aluminum 5.000 0.125 4.757 3.000 LD PTI
4826-50A 1480 Aluminum 5.000 0.125 4.755 2.875 LD PTI
4826-51A 1480 Aluminum 5.000 0.125 4.755 2.219 Vented LD AAM
4826-52A 1485 Aluminum 5.000 0.125 4.755 2.875 1485 series LD PTI
5-28-167 1610 Steel 3.500 0.095 3.321 3.000 35 HD Spicer
5-28-207 1610 Steel 3.500 0.156 3.199 3.000 35 HD Spicer
5-28-327 1610 Steel 4.000 0.134 3.743 3.000 0 HD Spicer
5-28-627 1610 Steel 3.500 0.134 3.243 3.000 35 HD Spicer
5-28-887 1610 Steel 3.500 0.134 3.243 3.810 0 HD Spicer
5-28-977M 1610 Steel 3.550 0.207 3.153 2.220 0 Metric bolt holes; uses 5-585XM U-joint HD Spicer
55-28-27 SPL55 Steel 3.500 0.083 3.334 2.834 LD Spicer
5526-35 1550 Steel 3.500 0.120 3.277 2.344 LD AAM
5526-506A 1550 Aluminum 5.000 0.125 4.755 2.750 LD PTI
5526-50A 1550 Aluminum 5.000 0.125 4.755 2.750 Billet Aluminum LD PTI
6-28-137 1710 Steel 3.500 0.156 3.199 3.031 22 HD Spicer
6-28-347 1710 Steel 4.000 0.134 3.743 3.031 30 HD Spicer
6-28-407 1710 Steel 4.500 0.134 4.242 3.031 22 HD Spicer
6-28-467 1710 Steel 4.000 0.134 3.743 3.688 45 HD Spicer
6-28-527 1710 Steel 4.000 0.134 3.743 4.060 0 HD Spicer
6-28-557M 1710 Steel 4.000 0.134 3.743 3.031 30 HD Spicer
6.5-28-117 1810 Steel 4.500 0.134 4.243 3.375 30 HD Spicer
6.5-28-127 1810 Steel 4.500 0.259 4.003 3.375 30 HD Spicer
70-28-27 SPL70 Steel 3.500 0.095 3.321 2.875 0 LD Spicer
8-28-147 1880 Steel 4.500 0.259 4.003 4.000 22.5 HD Spicer
90-28-27 SPL90 Steel 4.000 0.134 3.743 2.969 0 HD Spicer
A31-28-3012 1310 Aluminum 3.000 0.125 2.757 2.031 LD Neapco
A31-28-3512 1310 Aluminum 3.500 0.125 3.250 2.031 LD Neapco
A33-28-3012 1330 Aluminum 3.000 0.125 2.766 2.500 LD Neapco
A33-28-3511 1330 Aluminum 3.500 0.114 3.344 3.906 LD Neapco
A33-28-3512 1330 Aluminum 3.500 0.125 3.250 2.156 LD Neapco
A33-28-4008 1330 Aluminum 4.000 0.083 3.843 3.901 LD Neapco
A33-28-4009 1330 Aluminum 4.000 0.087 3.843 3.901 LD Neapco
A33-28-5012 1330 Aluminum 5.000 0.125 4.750 3.454 LD Neapco
A35-28-3511 1350 Aluminum 3.500 0.114 3.344 3.906 LD Neapco
A35-28-3512 1350 Aluminum 3.500 0.125 3.250 1.750 LD Neapco
A35-28-4008 1350 Aluminum 4.000 0.083 3.843 3.901 LD Neapco
A35-28-5012 1350 Aluminum 5.000 0.125 4.750 3.454 LD Neapco
A41-28-4009 1410 Aluminum 4.000 0.087 3.844 3.906 LD Neapco
A41-28-5012 1410 Aluminum 5.000 0.125 4.750 3.454 LD Neapco
A48-28-5012 1480 Aluminum 5.000 0.125 4.750 3.454 LD Neapco
N100-29-45-ACF SPL100 Aluminum 4.810 0.155 4.500 Carbon Fiber Bond Yoke HD Neapco
N100-29-50-ACF SPL100 Aluminum 5.310 0.155 5.000 Carbon Fiber Bond Yoke HD Neapco
N2-28-021 1310 Steel 4.000 0.065 3.884 1.625 21.5 LD Neapco
N2-29-3120-ACF 1310 Aluminum 2.310 0.155 2.000 Carbon Fiber Bond Yoke LD Neapco
N2-29-3125-ACF 1310 Aluminum 2.810 0.155 2.500 Carbon Fiber Bond Yoke LD Neapco
N2-29-3130-ACF 1310 Aluminum 3.310 0.155 3.000 2.250 Carbon Fiber Bond Yoke LD Neapco
N2-29-3135-ACF 1310 Aluminum 3.810 0.155 3.500 Carbon Fiber Bond Yoke LD Neapco
N3-28-137 1350 Steel 3.000 0.065 2.875 2.030 LD Neapco
N3-28-57-1 1350 Steel 2.750 0.095 2.562 2.000 20 LD Neapco
N3-28-57-2 1350 Steel 2.750 0.065 2.625 2.000 20 LD Neapco
N3-28-857 1410 Steel 3.500 0.095 3.321 2.125 30 LD Neapco
N3-29-3530-ACF 1350 Aluminum 3.310 0.155 3.000 Carbon Fiber Bond Yoke LD Neapco
N3-29-3535-ACF 1350 Aluminum 3.810 0.155 3.500 Carbon Fiber Bond Yoke LD Neapco
N3-29-4135-ACF 1410 Aluminum 3.810 0.155 3.500 Carbon Fiber Bond Yoke HD Neapco
N3-29-4140-ACF 1410 Aluminum 4.310 0.155 4.000 Carbon Fiber Bond Yoke HD Neapco
N3-29-4145-ACF 1410 Aluminum 4.810 0.155 4.500 Carbon Fiber Bond Yoke HD Neapco
N3-29-4150-ACF 1410 Aluminum 5.310 0.155 5.000 Carbon Fiber Bond Yoke HD Neapco
N3-29-4840-ACF 1480 Aluminum 4.310 0.155 4.000 Carbon Fiber Bond Yoke HD Neapco
N3-29-4845-ACF 1480 Aluminum 4.810 0.155 4.500 Carbon Fiber Bond Yoke HD Neapco
N3-29-4850-ACF 1480 Aluminum 5.310 0.155 5.000 Carbon Fiber Bond Yoke HD Neapco
N35-28-4012 1350 Aluminum 4.000 0.125 3.757 2.125 Discontinued LD Neapco
N3R-28-427 3R Steel 3.500 0.083 3.344 1.880 21.5 LD Neapco
N3R-28-437 3R Steel 3.000 0.083 2.844 1.875 LD Neapco
N3R-28-551 3R Steel 2.250 0.154 1.958 1.750 1995-99 GM Full size trucks, front shaft. PTI# 3R26-22 LD Neapco
N4-29-5545-ACF 1550 Aluminum 4.810 0.155 4.500 Carbon Fiber Bond Yoke HD Neapco
N4-29-5550-ACF 1550 Aluminum 5.310 0.155 5.000 Carbon Fiber Bond Yoke HD Neapco
NOE-04-2107-A 1000 Steel 1.625 0.065 1.503 2.000 BUTT DIAMETER (in): 1.503-1.506 LD Neapco
NOE-04-2108-A 1000 Steel 1.500 0.083 1.340 2.000 BUTT DIAMETER (in): 1.342-1.345 LD Neapco
NOE-04-2128-A 1000 Steel 2.000 0.083 1.845 3.270 BUTT DIAMETER (in): 1.842-1.846 LD Neapco
NOE-04-2140-A 1000 Steel 0.940 0.933 0.932 2.105 BUTT DIAMETER (in): .932-.934 LD Neapco
NOE-04-2143-A 1000 Steel 0.750 0.746 0.745 2.105 BUTT DIAMETER (in): .745-.747 LD Neapco
NOE-04-2165-A 1000 Steel 0.630 0.621 0.620 2.105 BUTT DIAMETER (in): .620-.622 LD Neapco
NOE-04-3870-A 1000 Steel 1.259 0.078 1.110 1.250 BUTT DIAMETER (in): 1.110-1.114 LD Neapco
NOE-04-6015-A 1000 Steel 1.259 0.078 1.110 1.800 BUTT DIAMETER (in): 1.110-1.114 LD Neapco
NOE-04-6016-A 1000 Steel 1.500 0.065 1.379 1.800 BUTT DIAMETER (in): 1.379-1.382 LD Neapco
NOE-04-6020-A 1000 Steel N/A N/A 0.934 2.264 LD Neapco
P100-28-17 SPL100 Steel 4.000 0.095 3.810 2.969 0 HD PTI
P170-28-17 SPL170 Steel 4.961 0.118 4.746 3.700 0 HD PTI
P170-28-27 SPL170 Steel 4.724 0.197 4.350 4.724 0 HD PTI
P2-28-1177 1330 Steel 3.000 0.065 2.881 1.719 25 LD PTI
P2-28-1697 1330 Steel 3.000 0.083 2.844 1.719 25 LD PTI
P2-28-1707 1330 Steel 2.500 0.083 2.345 1.719 25 LD PTI
P2-28-1707M 1330 Steel 2.500 0.095 2.321 1.719 25 LD PTI
P2-28-1717 1330 Steel 3.500 0.083 3.344 1.812 20 LD PTI
P2-28-1757 1310 Steel 2.000 0.120 1.771 1.688 22 LD PTI
P2-28-1947 1210 Steel 2.500 0.065 2.381 1.312 20 LD PTI
P2-28-1947M 1210 Steel 2.500 0.083 2.344 1.312 20 LD PTI
P2-28-1977 1330 Steel 3.500 0.065 3.381 1.812 0 LD PTI
P2-28-2417 1210 Steel 2.000 0.083 1.845 1.500 20 LD PTI
P2-28-277 1310 Steel 2.500 0.065 2.375 1.844 30 LD PTI
P2-28-307 1310 Steel 2.750 0.065 2.631 1.688 21.5 LD PTI
P2-28-327 1310 Steel 3.000 0.065 2.881 1.688 18 LD PTI
P2-28-357 1310 Steel 2.000 0.083 1.845 1.690 0 LD PTI
P2-28-367 1310 Steel 2.500 0.083 2.345 1.844 30 LD PTI
P2-28-397 1310 Steel 3.500 0.065 3.381 1.688 21.5 LD PTI
P2-28-427 1310 Steel 3.500 0.083 3.344 1.688 0 LD PTI
P2-28-437 1310 Steel 3.000 0.083 2.844 1.688 0 LD PTI
P2-28-577 1310 Steel 2.000 0.095 1.821 1.688 22 LD PTI
P250-28-17 SPL250 Steel 5.197 0.236 4.746 4.094 0 HD PTI
P3-28-257 1350 Steel 3.500 0.065 3.381 1.812 20 LD PTI
P3-28-427 1350 Steel 3.500 0.083 3.344 1.840 20 LD PTI
P3-28-427M 1350 Steel 3.500 0.095 3.321 1.840 20 LD PTI
P3-28-47 1350 Steel 2.500 0.083 2.345 1.938 20 LD PTI
P3-28-537 1480 Steel 3.500 0.083 3.344 2.031 22 LD PTI
P3-28-547 1480 Steel 3.500 0.083 3.344 2.312 35 LD PTI
P3-28-557 1410 Steel 3.500 0.083 3.344 2.125 30 LD PTI
P3-28-567 1480 Steel 3.500 0.095 3.321 2.031 22 LD PTI
P3-28-57 1350 Steel 3.000 0.083 2.844 2.000 20 LD PTI
P3-28-857 1410 Steel 3.500 0.095 3.321 2.125 30 LD PTI
P3-28-97 1410 Steel 3.000 0.083 2.844 2.125 30 LD PTI
P4-28-307 1550 Steel 3.500 0.095 3.321 2.188 22.5 LD PTI
P5-28-627 1610 Steel 3.500 0.134 3.243 3.000 35 HD PTI
P6-28-347 1710 Steel 4.000 0.134 3.743 3.031 30 HD PTI
P6-28-407 1710 Steel 4.500 0.134 4.242 3.031 22 HD PTI
P6-28-467 1710 Steel 4.000 0.134 3.743 3.688 45 HD PTI
P6.3-28-17 1760 Steel 4.095 0.180 3.743 3.031 30 HD PTI
P6.5-28-117 1810 Steel 4.500 0.134 4.243 3.375 30 HD PTI
P6.5-28-127 1810 Steel 4.500 0.259 4.003 3.375 30 HD PTI
P90-28-27 SPL90 Steel 4.000 0.134 3.743 2.969 0 HD PTI